Network Support Engineer

Job Summary

Hands & Feet (H&F) Support

Physical onsite assistance to enable remote troubleshooting and remediation.

Console connectivity to network devices (switch/router/firewall) as instructed by the Remote

Support Team.

Providing physical access support to the Remote Support Team (e.g. opening racks locating

devices/ports power cycling per instruction).

Visual verification and reporting (LED status link status alarms fan/power status cabling

condition).

Network Hands & Feet

Engineer must have basic understanding of network devices sufficient to:

Identify network equipment types ports power supplies up links and patch panel layouts.

Follow remote instructions accurately (step-by-step) without deviating from approved

runbooks.

Perform basic checks: link lights port mapping verification cable reseat label verification.

Network Device Rack & Stack

Rack mounting/unmounting of network devices per site rules and safety practices.

Patch and dress cables to basic professional standard (as instructed).

Coordinate with Remote Support Team for post-install verification.

Basic Configuration

Perform basic level initial actions (only as instructed by the Remote Support Team) such

as:

o Connecting console and granting remote access session (screen share/terminal access

where applicable).

o Executing clearly provided command steps (copy/paste) when approved.

o Applying basic baseline actions (e.g. set management IP/VLAN) only when explicitly

instructed and approved

Requirements

Job Requirements:

• Bachelors degree or Diploma in Computer Science Information Technology Network Engineering or a related field (preferred).
  

• 2 years of hands-on experience supporting enterprise network infrastructure.
  
• Basic knowledge of networking concepts including TCP/IP VLANs switches routers and firewalls.
  
• Experience with console connections and network device installation.
  
• Familiarity with structured cabling and patch panels.
  
• Ability to follow technical instructions accurately and work within documented procedures.
  
• Strong troubleshooting and problem-solving skills.
  
• Excellent communication skills and ability to work effectively with remote technical teams.
  
• Ability to work independently at customer sites.
  
• Willingness to travel to customer locations when required.
  

• Working at Heights Training Certificate.
  Medical Fitness Certificate.
  

Required Tools

• 16 Gb Usb drives with FAT32 compatibility console cables and good internet connectivity modem
  
• Good internet connection
  
• Laptop (with console software like PuTTY) and proper console drivers
  
• Pen drive Minimum: 4 to 8GB without any data (May be required to format)
  
• Console Cable - RJ45-to-USB (For Cisco C9300L-24P)
  
• Console cable - RJ45-to-USB-C
  
• Console cable - RJ45-to-mini-USB
  
• Multimeter (to check power output if needed)
  
• Laptop MS Teams Zoom Putty Webex
  
• Cat5 cable (Straight 1 Crossover cable 1)
  
• 4G Connection Dongle
  
• Basic Screwdriver Kit
  
• PPE Kits.
  

Preferred Qualifications

• Cisco CCNA or equivalent networking certification.
  
• Experience supporting Cisco Juniper HPE/Aruba Fortinet Palo Alto or similar networking equipment.
  
• Experience working in data centers or enterprise network environments.
  
• Familiarity with ITIL processes and ticketing systems.
  

Key Skills

• Proficient in English Language
  
• Network Device Installation
  
• Hands & Feet Support
  
• Rack & Stack
  
• Structured Cabling
  
• Console Access
  
• Switches Routers & Firewalls
  
• Basic Network Configuration
  
• Hardware Troubleshooting
  
• Communication & Customer Service
  
• Documentation & Reporting
  

Required Skills:

Physical onsite assistance to enable remote troubleshooting and remediation. Console connectivity to network devices (switch/router/firewall) as instructed by the Remote Support Team. Providing physical access support to the Remote Support Team (e.g. opening racks locating devices/ports power cycling per instruction). Visual verification and reporting (LED status link status alarms fan/power status cabling condition). Engineer must have basic understanding of network devices sufficient to: Identify network equipment types ports power supplies uplinks and patch panel layouts. Follow remote instructions accurately (step-by-step) without deviating from approved runbooks. Perform basic checks: link lights port mapping verification cable reseat label verification. Network Device Rack & Stack Rack mounting/unmounting of network devices per site rules and safety practices. Patch and dress cables to basic professional standard (as instructed). Coordinate with Remote Support Team for post-install verification. Basic Configuration Perform basic level initial actions (only as instructed by the Remote Support Team) such as: Connecting console and granting remote access session (screen share/terminal access where applicable). Executing clearly provided command steps (copy/paste) when approved. Applying basic baseline actions (e.g. set management IP/VLAN) only when explicitly instructed and approved.

Required Education:

Qualifications and ExperienceDegree or equivalent qualification in Information Technology Computer Science Engineering or a related least three years of relevant application infrastructure network or field-support experience with Windows Linux servers networks and IT service-management supporting eGates kiosks or biometric equipment is Microsoft Linux Cisco CompTIA or relevant OEM certification is desirable.

Apply Now